4.6. Results Verification

Next: Results Publication Previous: Capturing results  

Verification of analysis requests

The To be verified  list reflects all analysis requests for which all the results have been submitted

To be verified list

The results may be verified by selecting the checkbox and clicking on the [verify] button. The analysis request is then moved into Verified status

The results may be retracted by selecting the checkbox and clicking on the [retract] button. The analysis request is then moved back into In the lab status, and the results must be resubmitted to process the request

The lab manager additionally sees these requests in a pop-up on the right of the screen

To be verified pop-up

An individual analysis request may be viewed by clicking on the request id link, from where the request may be verified or rejected via the state drop-down

State drop-down

Verification of individual test results

Due to the fact that some analysis methods take longer than others, it may be necessary to verify and publish results of some tests before all the tests on the request have been completed. This is done from the |manage results| tab on analysis requests

Check the individual analysis and click the button corresponding to the action required

Publishing an individual result, Balling, while other results on the same request are still in progress

Verification of results per worksheet

Once the results have been submitted on a worksheet, it is possible to change the status to to be verified by selecting submit for verification  from the drop-down on a worksheet

Worksheet – submit for verification

The worksheet is then in to be verified status, and appears in the lab manager’s pop-up of to be verified requests. The lab manager selects this worksheet, either from the pop-up or from list of worksheets, and verifies or retracts the results. The individual test results are recorded in the analysis request in the same status as the worksheet

Next: Results Publication Previous: Capturing results